Set up and operate some or all of the following production equipment: Press Brake, Shear, Ironworker, Saw, Spot Welder, and Tumbler (list is not all inclusive). 2. Manage time effectively to operate several machines during the shift. 3. Safely operate forklift to load and unload raw material and completed parts. 4. Safely operate overhead crane and jib crane to move material. 5. Handle assorted steel raw material and steel scrap. 6. Separate/ pick parts from skeletons that are cut on the laser and stack onto pallet/containers. 7. Maintain work area and production equipment in clean and orderly condition. Follows all prescribed and standard safety regulations. 8. Perform work in a manner that all products conform to prescribed quality standards. 9. Perform light maintenance on plant equipment where needed; i.e., startup/shutdown, lockout/tagout procedures, maintaining inspection records and keeping work environment clean. 10. Use and understand ERP system for clocking in, logging...
Jan 17, 2021
Set up and operate some or all of the following production equipment: Press Brake, Shear, Ironworker, Saw, Spot Welder, and Tumbler (list is not all inclusive). 2. Manage time effectively to operate several machines during the shift. 3. Safely operate forklift to load and unload raw material and completed parts. 4. Safely operate overhead crane and jib crane to move material. 5. Handle assorted steel raw material and steel scrap. 6. Separate/ pick parts from skeletons that are cut on the laser and stack onto pallet/containers. 7. Maintain work area and production equipment in clean and orderly condition. Follows all prescribed and standard safety regulations. 8. Perform work in a manner that all products conform to prescribed quality standards. 9. Perform light maintenance on plant equipment where needed; i.e., startup/shutdown, lockout/tagout procedures, maintaining inspection records and keeping work environment clean. 10. Use and understand ERP system for clocking in, logging...
Garco Construction, Inc. is an ENR Top 400 general contractor with offices in Spokane and Tacoma, Washington. In addition to self-performing a substantial amount of construction, Garco provides high quality design build services through our in house architect and design department, as well as through strong partnerships with local and national architectural and engineering firms. We achieve this by employing highly qualified people, emphasizing advanced technology, continuing education, high safety standards and quality control.
Job Description
As a Construction Ironworker you will connect bolts, welds, and performs other activities required for assembling structural steel and placement of rebar. Some of the key items you will need to do on a daily basis will be:
+ Raise, place and unite grinders, columns and structural steel members to form completed structures of frameworks.
+ May signal other structural steel.
+ Forcessteel members...
Jan 17, 2021
Garco Construction, Inc. is an ENR Top 400 general contractor with offices in Spokane and Tacoma, Washington. In addition to self-performing a substantial amount of construction, Garco provides high quality design build services through our in house architect and design department, as well as through strong partnerships with local and national architectural and engineering firms. We achieve this by employing highly qualified people, emphasizing advanced technology, continuing education, high safety standards and quality control.
Job Description
As a Construction Ironworker you will connect bolts, welds, and performs other activities required for assembling structural steel and placement of rebar. Some of the key items you will need to do on a daily basis will be:
+ Raise, place and unite grinders, columns and structural steel members to form completed structures of frameworks.
+ May signal other structural steel.
+ Forcessteel members...
Garco Construction, Inc. is an ENR Top 400 general contractor with offices in Spokane and Tacoma, Washington. In addition to self-performing a substantial amount of construction, Garco provides high quality design build services through our in house architect and design department, as well as through strong partnerships with local and national architectural and engineering firms. We achieve this by employing highly qualified people, emphasizing advanced technology, continuing education, high safety standards and quality control.
Job Description
As a Construction Ironworker you will connect bolts, welds, and performs other activities required for assembling structural steel and placement of rebar. Some of the key items you will need to do on a daily basis will be:
+ Raise, place and unite grinders, columns and structural steel members to form completed structures of frameworks.
+ May signal other structural steel.
+ Forcessteel members...
Jan 17, 2021
Garco Construction, Inc. is an ENR Top 400 general contractor with offices in Spokane and Tacoma, Washington. In addition to self-performing a substantial amount of construction, Garco provides high quality design build services through our in house architect and design department, as well as through strong partnerships with local and national architectural and engineering firms. We achieve this by employing highly qualified people, emphasizing advanced technology, continuing education, high safety standards and quality control.
Job Description
As a Construction Ironworker you will connect bolts, welds, and performs other activities required for assembling structural steel and placement of rebar. Some of the key items you will need to do on a daily basis will be:
+ Raise, place and unite grinders, columns and structural steel members to form completed structures of frameworks.
+ May signal other structural steel.
+ Forcessteel members...
Job Description
Upcoming New Project!
Under supervision, the Journeyman Ironworker is responsible for completing tasks related to structural iron and steel erection and completing the tasks in a timely, quality manner.
Required Skills
* Bolt-up structural member following blueprints and instructions from supervisors.
* Ability to weld 3G and 4G
* Rig structural-steel members to hoist cables, using chains, cables, or rope.
* Hoist steel beams, girders, and columns into place, using cranes, or signal hoisting equipment operators to lift and position structural-steel members.
* Detail Work: may include installing angle and bent plate, welding clips, joists, tube steel or angle kickers; installing safety cable and safety posts; or shaking out and spreading joists and long spans.
* Assembling: Plumbing of structural steel; installing deck; installing and welding steel stairs, handrail and guardrail.
* Field fabrication or assembly of metal parts such as steel frames, columns,...
Jan 17, 2021
Job Description
Upcoming New Project!
Under supervision, the Journeyman Ironworker is responsible for completing tasks related to structural iron and steel erection and completing the tasks in a timely, quality manner.
Required Skills
* Bolt-up structural member following blueprints and instructions from supervisors.
* Ability to weld 3G and 4G
* Rig structural-steel members to hoist cables, using chains, cables, or rope.
* Hoist steel beams, girders, and columns into place, using cranes, or signal hoisting equipment operators to lift and position structural-steel members.
* Detail Work: may include installing angle and bent plate, welding clips, joists, tube steel or angle kickers; installing safety cable and safety posts; or shaking out and spreading joists and long spans.
* Assembling: Plumbing of structural steel; installing deck; installing and welding steel stairs, handrail and guardrail.
* Field fabrication or assembly of metal parts such as steel frames, columns,...
Louisiana Department of State Civil Service
Virtual, USA
LABORER
Print
Apply
LABORER
Salary
$1,413.00 - $2,411.00 Monthly
Location
New Orleans, LA
Job Type
Classified
Department
Delgado Community College
Job Number
DCC-8362FA-WAE-EO
Closing
1/24/2021 11:59 PM Central
+ Description
+ Benefits
+ Questions
Supplemental Information
FA8362 and FA8366 - Laborer - Part-time
Two part-time Classified WAE positions may be filled with this posting...
Jan 17, 2021
LABORER
Print
Apply
LABORER
Salary
$1,413.00 - $2,411.00 Monthly
Location
New Orleans, LA
Job Type
Classified
Department
Delgado Community College
Job Number
DCC-8362FA-WAE-EO
Closing
1/24/2021 11:59 PM Central
+ Description
+ Benefits
+ Questions
Supplemental Information
FA8362 and FA8366 - Laborer - Part-time
Two part-time Classified WAE positions may be filled with this posting...
Louisiana Department of State Civil Service
Virtual, USA
Maintenance Repairer Master
Print
Apply
Maintenance Repairer Master
Salary
$2,643.00 - $4,741.00 Monthly
Location
Houma, LA
Job Type
Promotion
Department
Houma/Terrebonne Housing Authority
Job Number
135139
Closing
1/22/2021 11:59 PM Central
+ Description
+ Benefits
+ Questions
Supplemental Information
*This position is only open to current permanent Houma Terrebonne Housing Authority employees....
Jan 17, 2021
Maintenance Repairer Master
Print
Apply
Maintenance Repairer Master
Salary
$2,643.00 - $4,741.00 Monthly
Location
Houma, LA
Job Type
Promotion
Department
Houma/Terrebonne Housing Authority
Job Number
135139
Closing
1/22/2021 11:59 PM Central
+ Description
+ Benefits
+ Questions
Supplemental Information
*This position is only open to current permanent Houma Terrebonne Housing Authority employees....
JOB REQUIREMENTS: Description As a Metal Finisher at Kapco, you will have the chance to make a direct and positive impact on the quality of our products. Quality finished products lead to the increased satisfaction of our valued customers. You will be part of a team diligently working to provide the highest level metal fabrication and finishing. Kapco Core Values: Innovation, Attitude, Integrity, Impact, Accountability, Safety If you are driven to succeed with a passion for the professional growth and development of others, our employee-focused company may have the right opportunity for you. Kapco Inc. is looking for a Metal Finisher on 1st and 2nd shift at our Grafton, WI location. The ideal candidate for this position would be able to do the following: Grind, file or sand metal surfaces to remove burrs and sharp edges using hand tools and grinders Visually and physically inspect parts for any dents or scratches that need to be removed. Strong understanding in blueprint...
Jan 16, 2021
Full time
JOB REQUIREMENTS: Description As a Metal Finisher at Kapco, you will have the chance to make a direct and positive impact on the quality of our products. Quality finished products lead to the increased satisfaction of our valued customers. You will be part of a team diligently working to provide the highest level metal fabrication and finishing. Kapco Core Values: Innovation, Attitude, Integrity, Impact, Accountability, Safety If you are driven to succeed with a passion for the professional growth and development of others, our employee-focused company may have the right opportunity for you. Kapco Inc. is looking for a Metal Finisher on 1st and 2nd shift at our Grafton, WI location. The ideal candidate for this position would be able to do the following: Grind, file or sand metal surfaces to remove burrs and sharp edges using hand tools and grinders Visually and physically inspect parts for any dents or scratches that need to be removed. Strong understanding in blueprint...
Position Description:
Guy Metals is a leading stainless steel distributor that specializes in high value added processes. We are located in Hammond, WI and are a division of Ryerson, a leading distributor and processor of metals in North America with operating service centers in cities across the United States and Canada. Guy Metals offers a unique range of stainless steel products and processing capabilities. We have been servicing the greater Midwest for over 30 years with an established commitment to superior service and quality.
We are looking for a skilled general warehouseperson to join our Hammond, WI team working on 1st and 2nd shift.
Responsibilities of role:
* Load stainless steel skids, pallets and bundles on to flatbed trailers with sit down forklifts
* Keep work area(s) Safe and Productive
* Fill in for absent positions as qualified, excluding maintenance, as needed on a daily basis
* Assemble material for shipment or machines in accordance with specifications...
Jan 16, 2021
Full time
Position Description:
Guy Metals is a leading stainless steel distributor that specializes in high value added processes. We are located in Hammond, WI and are a division of Ryerson, a leading distributor and processor of metals in North America with operating service centers in cities across the United States and Canada. Guy Metals offers a unique range of stainless steel products and processing capabilities. We have been servicing the greater Midwest for over 30 years with an established commitment to superior service and quality.
We are looking for a skilled general warehouseperson to join our Hammond, WI team working on 1st and 2nd shift.
Responsibilities of role:
* Load stainless steel skids, pallets and bundles on to flatbed trailers with sit down forklifts
* Keep work area(s) Safe and Productive
* Fill in for absent positions as qualified, excluding maintenance, as needed on a daily basis
* Assemble material for shipment or machines in accordance with specifications...
Be part of a team that’s making a difference; where transformative technologies shape a smarter, safer, more sustainable world! LC Staffing is moving people forward with Applied Materials - Montana Operations in Kalispell. Click Here to learn more about Applied Materials and how they are helping to shape the future. This is your chance to start your career in the semiconductor manufacturing industry with a company that provides on the job training and educational opportunities!
Established and busy manufacturing in Flathead Valley is seeking full time Sheet Metal Fabricator.
This is a great opportunity for someone looking to make a positive career change and gain experience working with a well-known manufacturing company.
Job Duties for Sheet Metal Fabricator:
Sets up equipment operation including tooling/part holding fixtures and conventional feed and speed by interpreting, uploading/downloading, writing and editing on CNC (computerized numeric control) program.
Follows...
Jan 16, 2021
Full time
Be part of a team that’s making a difference; where transformative technologies shape a smarter, safer, more sustainable world! LC Staffing is moving people forward with Applied Materials - Montana Operations in Kalispell. Click Here to learn more about Applied Materials and how they are helping to shape the future. This is your chance to start your career in the semiconductor manufacturing industry with a company that provides on the job training and educational opportunities!
Established and busy manufacturing in Flathead Valley is seeking full time Sheet Metal Fabricator.
This is a great opportunity for someone looking to make a positive career change and gain experience working with a well-known manufacturing company.
Job Duties for Sheet Metal Fabricator:
Sets up equipment operation including tooling/part holding fixtures and conventional feed and speed by interpreting, uploading/downloading, writing and editing on CNC (computerized numeric control) program.
Follows...
**Requisition ID: 70902**
**Position Summary**
Responsible for the layout, installation, assembly and steel erection components in accordance with blueprint plans, specifications, codes, and industry standards.
**Experience Level**
Skilled
**Primary Responsibilities and Duties**
• Reads specifications or blueprints to determine the locations, quantities, or sizes of material required.
• Fabricates metal parts, such as steel frames, columns, beams, or girders, according to blueprints or instructions from supervisors.
• Unloads and positions prefabricated steel units for hoisting; hoists steel beams, girders, or columns into place, using cranes or signaling hoisting equipment operators to lift and position structural steel members.
• Verifies vertical and horizontal alignment of structural steel members, using plumb bobs, laser equipment, transits, or levels.
• Cuts, bends, or welds steel pieces, using...
Jan 16, 2021
**Requisition ID: 70902**
**Position Summary**
Responsible for the layout, installation, assembly and steel erection components in accordance with blueprint plans, specifications, codes, and industry standards.
**Experience Level**
Skilled
**Primary Responsibilities and Duties**
• Reads specifications or blueprints to determine the locations, quantities, or sizes of material required.
• Fabricates metal parts, such as steel frames, columns, beams, or girders, according to blueprints or instructions from supervisors.
• Unloads and positions prefabricated steel units for hoisting; hoists steel beams, girders, or columns into place, using cranes or signaling hoisting equipment operators to lift and position structural steel members.
• Verifies vertical and horizontal alignment of structural steel members, using plumb bobs, laser equipment, transits, or levels.
• Cuts, bends, or welds steel pieces, using...
**Requisition ID: 70861**
**Position Summary**
Ironworkers are responsible for the layout, installation, assembly and steel erection components in accordance with blueprint plans, specifications, codes, and industry standards.
**Experience Level**
Intermediate
**Primary Responsibilities and Duties**
• Reads specifications or blueprints to determine the locations, quantities, or sizes of material required.
• Fabricates metal parts, such as steel frames, columns, beams, or girders, according to blueprints or instructions from supervisors.
• Unloads and positions prefabricated steel units for hoisting; hoists steel beams, girders, or columns into place, using cranes or signaling hoisting equipment operators to lift and position structural steel members.
• Verifies vertical and horizontal alignment of structural steel members, using plumb bobs, laser equipment, transits, or levels.
• Cuts, bends, or welds...
Jan 16, 2021
**Requisition ID: 70861**
**Position Summary**
Ironworkers are responsible for the layout, installation, assembly and steel erection components in accordance with blueprint plans, specifications, codes, and industry standards.
**Experience Level**
Intermediate
**Primary Responsibilities and Duties**
• Reads specifications or blueprints to determine the locations, quantities, or sizes of material required.
• Fabricates metal parts, such as steel frames, columns, beams, or girders, according to blueprints or instructions from supervisors.
• Unloads and positions prefabricated steel units for hoisting; hoists steel beams, girders, or columns into place, using cranes or signaling hoisting equipment operators to lift and position structural steel members.
• Verifies vertical and horizontal alignment of structural steel members, using plumb bobs, laser equipment, transits, or levels.
• Cuts, bends, or welds...
## Minimum Qualifications
Thruway Maintenance Worker Trainee Levels:
Must be 18 years of age or older.
TMW Trainee 1 Level – 152 Week Traineeship:
Possession of a valid NYS Commercial Driver License Class B Permit with tank endorsement and no air brake restriction.
TMW Trainee 2 Level – 104 Week Traineeship:
Possession of a NYS Commercial Driver License Class B with tank endorsement and no air brake restriction AND 6 months of experience operating construction equipment and vehicles and 12 months of experience in carpentry, masonry, welding, ironwork, or other trade related to bridge construction or repair;
OR
A valid NYS Commercial Driver License Class B with tank endorsement and no air brake restriction AND 18 months of experience operating construction equipment and vehicles.
TMW Trainee 3 Level – 52 Week Traineeship:
Possession of a NYS Commercial Driver License Class B with tank endorsement and no air brake restriction AND 12 months of experience in operating construction...
Jan 16, 2021
## Minimum Qualifications
Thruway Maintenance Worker Trainee Levels:
Must be 18 years of age or older.
TMW Trainee 1 Level – 152 Week Traineeship:
Possession of a valid NYS Commercial Driver License Class B Permit with tank endorsement and no air brake restriction.
TMW Trainee 2 Level – 104 Week Traineeship:
Possession of a NYS Commercial Driver License Class B with tank endorsement and no air brake restriction AND 6 months of experience operating construction equipment and vehicles and 12 months of experience in carpentry, masonry, welding, ironwork, or other trade related to bridge construction or repair;
OR
A valid NYS Commercial Driver License Class B with tank endorsement and no air brake restriction AND 18 months of experience operating construction equipment and vehicles.
TMW Trainee 3 Level – 52 Week Traineeship:
Possession of a NYS Commercial Driver License Class B with tank endorsement and no air brake restriction AND 12 months of experience in operating construction...
Lincoln Electric is a global manufacturer of the highest quality welding, cutting and joining solutions ranging from simple to complex. With over 120 years of service excellence, we are committed to employing talent that will support our strategy to foster innovation and a first class experience for our customers. Lincoln Electric, where the actual is limited and the possible is immense.Req. ID: 19159 PURPOSE: This position is responsible for the preparation and set up of supplies and clean up of the Weld School.JOB DESCRIPTION (DUTIES AND RESPONSIBILITIES):* Prepares weld base materials for daily lessons. Ensures work areas are clean and equipment to be used in in place. * Assists with preparation of the Weld School Classrooms and Laboratories ensuring all appropriate supplies and equipment are available. * Performs tasks as directed by weld school manager. * Maintains an inventory of laboratory supplies and equipment and insures all are securely placed in correct areas. * May...
Jan 16, 2021
Lincoln Electric is a global manufacturer of the highest quality welding, cutting and joining solutions ranging from simple to complex. With over 120 years of service excellence, we are committed to employing talent that will support our strategy to foster innovation and a first class experience for our customers. Lincoln Electric, where the actual is limited and the possible is immense.Req. ID: 19159 PURPOSE: This position is responsible for the preparation and set up of supplies and clean up of the Weld School.JOB DESCRIPTION (DUTIES AND RESPONSIBILITIES):* Prepares weld base materials for daily lessons. Ensures work areas are clean and equipment to be used in in place. * Assists with preparation of the Weld School Classrooms and Laboratories ensuring all appropriate supplies and equipment are available. * Performs tasks as directed by weld school manager. * Maintains an inventory of laboratory supplies and equipment and insures all are securely placed in correct areas. * May...
Louisiana Department of State Civil Service
Virtual, USA
Maintenance Repairer 1-2
Print
Apply
Maintenance Repairer 1-2
Salary
$2,158.00 - $3,871.00 Monthly
Location
New Orleans, LA
Job Type
Classified
Department
SE LA Flood Protection Auth-East
Job Number
135191
Closing
1/24/2021 11:59 PM Central
+ Description
+ Benefits
Supplemental Information
No Civil Service test score is required in order to be considered for this vacancy.
To apply...
Jan 16, 2021
Maintenance Repairer 1-2
Print
Apply
Maintenance Repairer 1-2
Salary
$2,158.00 - $3,871.00 Monthly
Location
New Orleans, LA
Job Type
Classified
Department
SE LA Flood Protection Auth-East
Job Number
135191
Closing
1/24/2021 11:59 PM Central
+ Description
+ Benefits
Supplemental Information
No Civil Service test score is required in order to be considered for this vacancy.
To apply...
Louisiana Department of State Civil Service
Virtual, USA
MAINTENANCE REPAIRER 1
Print
Apply
MAINTENANCE REPAIRER 1
Salary
$2,158.00 - $3,871.00 Monthly
Location
Baton Rouge, LA
Job Type
Classified
Department
Southern University-Baton Rouge
Job Number
135187
Closing
1/20/2021 11:59 PM Central
+ Description
+ Benefits
Supplemental Information
No Civil Service test score is required in order to be considered for this vacancy.
To apply for this...
Jan 16, 2021
MAINTENANCE REPAIRER 1
Print
Apply
MAINTENANCE REPAIRER 1
Salary
$2,158.00 - $3,871.00 Monthly
Location
Baton Rouge, LA
Job Type
Classified
Department
Southern University-Baton Rouge
Job Number
135187
Closing
1/20/2021 11:59 PM Central
+ Description
+ Benefits
Supplemental Information
No Civil Service test score is required in order to be considered for this vacancy.
To apply for this...
**Requisition ID: 70903**
**Position Summary**
Effectively lead and manage crew members' daily activities and production according to the project timeline, plans, specifications, codes and industry standards and provide the necessary training on proper safety and operational procedures. Work with or supervise other crafts at levels appropriate to training and skills as requested by project supervision.
**Experience Level**
Lead
**Primary Responsibilities and Duties**
• Plan, coordinate and organize people, equipment, tools and materials to promote the safe, efficient and timely construction of the project.
• Ensure that construction equipment is correctly operated and maintained.
• Maintain accurate reporting records including job quantities, productivity rates, time sheets and daily management reports.
• May assist in developing a weekly schedule and in carrying out sequence of activities for assigned crew....
Jan 16, 2021
**Requisition ID: 70903**
**Position Summary**
Effectively lead and manage crew members' daily activities and production according to the project timeline, plans, specifications, codes and industry standards and provide the necessary training on proper safety and operational procedures. Work with or supervise other crafts at levels appropriate to training and skills as requested by project supervision.
**Experience Level**
Lead
**Primary Responsibilities and Duties**
• Plan, coordinate and organize people, equipment, tools and materials to promote the safe, efficient and timely construction of the project.
• Ensure that construction equipment is correctly operated and maintained.
• Maintain accurate reporting records including job quantities, productivity rates, time sheets and daily management reports.
• May assist in developing a weekly schedule and in carrying out sequence of activities for assigned crew....
style="font-weight: 400;"RCO Engineering is looking for a Precision Sheet Metal Fabricator to join our company!span style="font-style: inherit; font-weight: inherit;" style="font-style: inherit;"Tasks Needed to Perform:/spanulliMust be able to safely operate the following equipment:ulliBridgeport Lathe/liliDrill Press Handsaw/liliGrinders/liliPress Brake/liliHydraulic Shear/liliTube Bender/liliBend Tech/liliRivet Machine/liliMig Welder/liliTig Welder/liliSpot Welder/liliHydraulic Stamping Press/li/ul/liliMust be proficient at reading blueprints, blank development, fixture building, tool building, and layout and master layout of stampings. Must also have proficiency in the use of standard measuring equipment./liliSupport compliance with RCO Quality Policies./liliSupport RCO continuous improvement initiative./liliAny other duties as assigned./li/ul
Jan 15, 2021
Full time
style="font-weight: 400;"RCO Engineering is looking for a Precision Sheet Metal Fabricator to join our company!span style="font-style: inherit; font-weight: inherit;" style="font-style: inherit;"Tasks Needed to Perform:/spanulliMust be able to safely operate the following equipment:ulliBridgeport Lathe/liliDrill Press Handsaw/liliGrinders/liliPress Brake/liliHydraulic Shear/liliTube Bender/liliBend Tech/liliRivet Machine/liliMig Welder/liliTig Welder/liliSpot Welder/liliHydraulic Stamping Press/li/ul/liliMust be proficient at reading blueprints, blank development, fixture building, tool building, and layout and master layout of stampings. Must also have proficiency in the use of standard measuring equipment./liliSupport compliance with RCO Quality Policies./liliSupport RCO continuous improvement initiative./liliAny other duties as assigned./li/ul
This job was posted by https://illinoisjoblink.illinois.gov : For more information, please see: https://illinoisjoblink.illinois.gov/ada/r/jobs/3518771 anville Metal Stamping Co., Inc, is a world class aerospace manufacturing company seeking Sheet Metal Workers for 2nd and 3rd Shift. The selected individuals for this position will assume the following job responsibilities and duties:Follow standard operating procedures (SOPs) and setup sheets required for the job being performedSet up machine dies for processesOperate machinery for forming of sheet metalVisually inspect parts and materialsUse of a micrometer to measure and validate partsOther duties as assigned
Jan 15, 2021
Full time
This job was posted by https://illinoisjoblink.illinois.gov : For more information, please see: https://illinoisjoblink.illinois.gov/ada/r/jobs/3518771 anville Metal Stamping Co., Inc, is a world class aerospace manufacturing company seeking Sheet Metal Workers for 2nd and 3rd Shift. The selected individuals for this position will assume the following job responsibilities and duties:Follow standard operating procedures (SOPs) and setup sheets required for the job being performedSet up machine dies for processesOperate machinery for forming of sheet metalVisually inspect parts and materialsUse of a micrometer to measure and validate partsOther duties as assigned
Job Description
Sims Metal Management is the world's leading metal recycling company; turning unwanted post-consumer items and industrial scrap into raw materials for manufacturing operations around the world. We are currently looking for a Metal Inspector to join our facility in Worcester, MA.
Job Summary
Inspects and purchases non-ferrous materials coming in to comply with specifications.
Major Job Responsibilities/Duties
Examines customer material to determine the non-ferrous commodity. Determine what commodity to purchase the material.
Inspects product to determine compliance with company's specifications, quality control system for compliance with legal requirements, and shipping conformity to specified standards
Uses a computer kiosk to purchase material
Stamps mark of approval or rejection on product and writes report of examination
Perform other duties may be assigned
Job Qualifications
* High School diploma or general education degree (GED)
* One to...
Jan 15, 2021
Full time
Job Description
Sims Metal Management is the world's leading metal recycling company; turning unwanted post-consumer items and industrial scrap into raw materials for manufacturing operations around the world. We are currently looking for a Metal Inspector to join our facility in Worcester, MA.
Job Summary
Inspects and purchases non-ferrous materials coming in to comply with specifications.
Major Job Responsibilities/Duties
Examines customer material to determine the non-ferrous commodity. Determine what commodity to purchase the material.
Inspects product to determine compliance with company's specifications, quality control system for compliance with legal requirements, and shipping conformity to specified standards
Uses a computer kiosk to purchase material
Stamps mark of approval or rejection on product and writes report of examination
Perform other duties may be assigned
Job Qualifications
* High School diploma or general education degree (GED)
* One to...
Urgent
This is a 95% travel position. This position is a field crew job, and you do not have to be from Texas to apply.
Electricians
Maintenance
Vital Link, Inc. (VLI) is currently hiring Journeyman and entry level positions in our Field Department. Positions require full time travel in the US and possibly overseas. VLI seeks personnel who can work effectively in a small Contract Field Team, supporting repair, maintenance and installation of USAF Noise Suppressors (Engine Test Cells and Hush Houses). Please refer to our website www.vitallinkinc.com (http://www.vitallinkinc.com/).
Positions are available in the following disciplines: Electrician, Ironworker, Sheetmetal Worker, Welder (Structural), Carpenter/Millwright, Painter and Laborer (entry level). General knowledge of industrial construction is required. Experience with steel erection and refurbishment is preferred. Must have the ability to read blueprints. For Journeyman...
Jan 15, 2021
Urgent
This is a 95% travel position. This position is a field crew job, and you do not have to be from Texas to apply.
Electricians
Maintenance
Vital Link, Inc. (VLI) is currently hiring Journeyman and entry level positions in our Field Department. Positions require full time travel in the US and possibly overseas. VLI seeks personnel who can work effectively in a small Contract Field Team, supporting repair, maintenance and installation of USAF Noise Suppressors (Engine Test Cells and Hush Houses). Please refer to our website www.vitallinkinc.com (http://www.vitallinkinc.com/).
Positions are available in the following disciplines: Electrician, Ironworker, Sheetmetal Worker, Welder (Structural), Carpenter/Millwright, Painter and Laborer (entry level). General knowledge of industrial construction is required. Experience with steel erection and refurbishment is preferred. Must have the ability to read blueprints. For Journeyman...